Re: unknown Sega/Gremlin G-80 sound? board

Anyone have a pic of a space odyssey sound board ?

If I made a pic available would that help people identify it ?

-- Curt

>From: "Mark Jenison" <jenison@enteract.com>
>To: <vectorlist@synthcom.com>
>Subject: Re: VECTOR: unknown Sega/Gremlin G-80 sound? board
>Date: Thu, 21 Nov 2002 08:45:24 -0500
>MIME-Version: 1.0
>Content-Transfer-Encoding: 7bit
>X-Priority: 3
>X-MSMail-Priority: Normal
>X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000
>
>Sounds like a Space Oddessey sound board. It has 2 4pin connectors.
>
>----- Original Message -----
>From: "Curtis H. Wilbar Jr." <vector@hawkmountain.net>
>To: <vectorlist@synthcom.com>
>Sent: Thursday, November 21, 2002 2:49 AM
>Subject: VECTOR: unknown Sega/Gremlin G-80 sound? board
>
>
>>
>> I'm trying to identify a G-80 (I assume it is G-80 as it is Sega/Gremlin
>> and has the same form factor and connector as other G-80 boards) board.
>>
>> I believe it to be a sound board. The only numbers are 834-0041 and on
>> the back PCB 171-0003. It is loaded with LM324N chips and has two 4
>> pin header connectors.
>>
>> The board has several areas where chips could be added for what purpose
>> I don't know... each area looks like:
>>
>> oooooooo
>> oooooooo
>> oooooooo
>>
>> oooooooo
>> oooooooo
>> oooooooo
>>
>> These empty locations are labelled IC6, IC20, IC22, IC28, IC36, IC40, and
>IC41
>>
>> No amount of net searching I have done has turned up anything usefull.
>>
>> It appears all the vector games have board part numbers 800-XXXX ??? If
>this
>> is so, I'd guess this might be a G-80 raster sound board (although net
>> searches there don't seem to turn up any matching part numbers either).
>>
>> Hoping someone out there has a clue what this is.
>>
>> -- Curt
>>
>> vector@hawkmountain.net
>>
>> --------------------------------------------------------------------------
>-
>> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
>the
>> ** message body to vectorlist-request@synthcom.com. Please direct other
>> ** questions, comments, or problems to vectorlist-owner@synthcom.com.
>>
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to vectorlist-owner@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Thu Nov 21 10:19:07 2002