Subject: VECTOR: MC1 replacement test (was: Amplifone CRT and yoke on eBay.)
Date: Mon, 29 Apr 2002 14:30:20 -0500
From: "Bachmann, Joe C" <joe.c.bachmann@xo.com>
The test went very well. It held its own for hours (and many death star
explosions.) The transformer and MC1 seemed to be running at normal temps
too.
I would apreciate if someone else would be willing to take the time to test
this also. The values of the chokes may need to be adjusted slighty, but
seem pretty close. (I noticed that there may have been a slight bit more
flashing on the green text in the SW intro. But, I hadn't adjust focus or
anything either.) I would recommend only running this on a Wintron.
PCB PCB
| 10mh 10mh |
------/\/\/\/\--/\/\/\/\--------
| |
------/\/\/\/\----------
10mh
JB
"Christopher X. Candreva" wrote:
> On Wed, 29 Jan 2003 MKDUD@aol.com wrote:
>
> > Have you tried (or do you have access to) another MCI? See the MCI section of
> > faq....
>
> Hmm -- the FAQ seems to be a bit behind. Didn't someone post recently on the
> list that they had opened an MCI, and found it was just three inductors
> arranged in a triangle (1 in parallel with 2 in series) ?
>
> Does anyone keep a vectorlist archive ?
>
> -Chris
>
> ==========================================================
> Chris Candreva -- chris@westnet.com -- (914) 967-7816
> WestNet Internet Services of Westchester
> http://www.westnet.com/
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to vectorlist-owner@synthcom.com.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Wed Jan 29 10:52:19 2003
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:34:19 EDT