RE: Re: ampliphone

Thanks Tom.

You may also like to try removing CR1 and Q5 from the circuit. I had
trouble with the regs blowing on one board. When you remove this you
completely disable the over voltage circuitry. I have had one running
like this for some time now.

JB

-----Original Message-----
From: Tom McClintock [mailto:tomm@mgcap.com]
Sent: Wednesday, January 29, 2003 12:55 PM
To: vectorlist@synthcom.com
Subject: Re: VECTOR: Re: ampliphone

Subject: VECTOR: MC1 replacement test (was: Amplifone CRT and yoke on
eBay.)
Date: Mon, 29 Apr 2002 14:30:20 -0500
From: "Bachmann, Joe C" <joe.c.bachmann@xo.com>

The test went very well. It held its own for hours (and many death star
explosions.) The transformer and MC1 seemed to be running at normal
temps too.

I would apreciate if someone else would be willing to take the time to
test this also. The values of the chokes may need to be adjusted
slighty, but seem pretty close. (I noticed that there may have been a
slight bit more flashing on the green text in the SW intro. But, I
hadn't adjust focus or anything either.) I would recommend only running
this on a Wintron.

PCB PCB
| 10mh 10mh |
------/\/\/\/\--/\/\/\/\--------
   | |
   ------/\/\/\/\----------
          10mh

JB

"Christopher X. Candreva" wrote:

> On Wed, 29 Jan 2003 MKDUD@aol.com wrote:
>
> > Have you tried (or do you have access to) another MCI? See the MCI
> > section of faq....
>
> Hmm -- the FAQ seems to be a bit behind. Didn't someone post recently
> on the list that they had opened an MCI, and found it was just three
> inductors arranged in a triangle (1 in parallel with 2 in series) ?
>
> Does anyone keep a vectorlist archive ?
>
> -Chris
>

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Wed Jan 29 11:01:56 2003