On Sun, 6 Apr 2003, Rodger Boots wrote:
> Remove and test the resonating capacitor (C8? Hard to read schematic.
C8 .033uf 600v polypropylene
This is one for the FAQ -- when you are blowing/overheating 24v regs and
BU406D, but everything else checks out.
The one I pulled is reading .2 NANO farads. Even checked the one on my good
monitor, figureing even I couldn't screw THAT up. Cap checker is good. C8
is bad.
The bad one is a plastic box, the good one is the red film package. Any
flame-related reasons to go with one over the other ?
-Chris
==========================================================
Chris Candreva -- chris@westnet.com -- (914) 967-7816
WestNet Internet Services of Westchester
http://www.westnet.com/
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Sun Apr 6 19:09:45 2003
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:34:27 EDT