Perhaps the PS is the piece that was hacked. Or, it looks as though the
'smooth bottomed' connector on the PS in question would accept the 'toothed'
harness as the pins look right and the points of the teeth of the 'toothed'
connector look to be beyond the smooth bottom of the PS connector.
on 5/26/03 14:27, Tony Jones at tony@tonyjones.com wrote:
>
>> that definatley looks like a Battlezone brick to me.. ?? has your cab been
>> hacked to take a later brick with different connector styles?
>
> Doesn't look like it. Wiring is clean and neat, with same style zip ties
> all the way along the wiring to the different style connector.
>
> Here is a pic of the PSU that was in the cabaret, you can see that the
> upper left 15pin header is different.
>
> http://www.tonyjones.com/games/bzpsu2.jpg
>
> I was going to post it FS, obviously untested, but just wanted to be somewhat
> sure as to what I was selling. It was sold to me as a working BZ from someone
> I had 100% success with, so hopefully it's just a wiring oddity.
>
> thanks!
>
> Tony
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Mon May 26 20:26:40 2003
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:34:32 EDT
