On Tue, 27 Apr 2004, Tom McClintock wrote:
> Apparently Tempest PCBs have a monochrome output and
> *will* work with G05s. Zonn just noted something about it
> on rgvac :)
Sorry -- yes -- that's why I said "Unless it has a custom wireing harness".
The Z testpoint on the board would be the B/W output. But you can't just
plug a monochrome monitor into the standard plug for the color monitor and
have it work.
I've mentioned this before on the list -- but the key to figuring this is
the fact that there is only 1 Z DAC. There is only a single 'intensity'
value being set, and it is switched to the r/g/b outputs to make the colors
if a given 'dot'.
==========================================================
Chris Candreva -- chris@westnet.com -- (914) 967-7816
WestNet Internet Services of Westchester
http://www.westnet.com/
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Tue Apr 27 20:31:48 2004
This archive was generated by hypermail 2.1.8 : Tue Apr 27 2004 - 20:50:01 EDT