On Tue, 27 Apr 2004 20:15:45 -0400, "Tom McClintock" <tomm@mgcap.com> wrote:
>Apparently Tempest PCBs have a monochrome output and
>*will* work with G05s. Zonn just noted something about it
>on rgvac :)
Right, but it would require a custom cable.
-Zonn
>tm
>
>On Tue, 27 Apr 2004 19:35:37 -0400 (EDT)
> "Christopher X. Candreva" <chris@westnet.com> wrote:
>> On Tue, 27 Apr 2004, aaron@classicarcade.org wrote:
>>
>> > Got a nice Tempest with a 19V2000 Monochrome in it.
>>
>> Tempest is a color game. Unless it has a custom wireing
>> harness, the B&W
>> and color vector monitors are not pin compatible.
>>
>> > I do not own a O-Scope.
>>
>> Find a color monitor ? :-)
>>
>> If you are going to do vector work, you want a scope.
>> Borrow one for this
>> project, look for a good deal.
>>
>>
>> ==========================================================
>> Chris Candreva -- chris@westnet.com -- (914) 967-7816
>> WestNet Internet Services of Westchester
>> http://www.westnet.com/
>> ---------------------------------------------------------------------------
>> ** Unsubscribe, subscribe, or view the archives at
>> http://www.vectorlist.org
>> ** Please direct other questions, comments, or problems
>> to chris@westnet.com
>
>---------------------------------------------------------------------------
>** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
>** Please direct other questions, comments, or problems to chris@westnet.com
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Tue Apr 27 20:32:16 2004
This archive was generated by hypermail 2.1.8 : Tue Apr 27 2004 - 21:50:01 EDT