On Fri, 1 Apr 2005, Pinx wrote:
> "blooming" and so i have just re-capped the HV section, but i still have
> the problem. Is there anything else on the HV board i should replace to
> cure this problem ?
Re-capping isn't really a fix for blooming. Blooming comes from voltage in
the HV section. The simple way to check that is with a HV probe, which can
be had for under $20 on e-bay usually.
If it is low, it can be adjusted, the pot may have just slipped.
==========================================================
Chris Candreva -- chris@westnet.com -- (914) 967-7816
WestNet Internet Services of Westchester
http://www.westnet.com/
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Fri Apr 1 14:22:35 2005
This archive was generated by hypermail 2.1.8 : Fri Apr 01 2005 - 16:50:00 EST