Re: Omega Race Spinner

Here's an email I sent to Vectorlist about a year ago.

-----------------------------
I just got my 10k potentiometer in the mail today from Mouser. It works
perfectly. You do have to adjust the two pots on the encoder board to get
a smooth motion all the way around. Mine stuck a little bit at the 3
o'clock position, but now it's pretty good.

So, for anyone that wishes to do the same - the mouser part number is
652-6639s-1-103
--------------------------

Hope that helps.

Matt

----- Original Message -----
From: "Rich Marquette" <rmarket@dca.net>
To: <vectorlist@vectorlist.org>
Sent: Wednesday, June 29, 2005 5:53 PM
Subject: VECTOR: Omega Race Spinner

>
> Has anyone know a source for a replacement 10K pot for the Omega Race
> spinner? Or has anyone ever come across an Omega Race that actually used
> the Optical Encoder that is mentioned in the manual? I'm confused on how
a
> pot or an encoder could be used, can anyone enlighten me on how that was
> possible? I would think that there would need to be changes to the Board
to
> allow it but I didn't see any mention of that.
>
> Thanks
> Rich
>
> --------------------------------------------------------------------------
-
> ** Unsubscribe, subscribe, or view the archives at
http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
chris@westnet.com
>
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Wed Jun 29 21:04:45 2005