Re: Vector Tube talking sorting out tubes with model #'s

Hi,

I have never tried that. From what I read the M48 was med res?

Mark Capps

simon hanlon wrote:

> Have you tried the 25" tube form star wars on a G08 before?
> ----- Original Message ----- From: "big dog" <catfishh@bellsouth.net>
> To: <vectorlist@vectorlist.org>
> Sent: Thursday, November 17, 2005 1:37 AM
> Subject: VECTOR: Vector Tube talking sorting out tubes with model #'s
>
>
>> Hi,
>>
>> I am trying to get all of the vector tubes sorted out, below are the
>> tubes I can buy and the info I think is correct?
>>
>> 19VLTP22........used on early AMP monitors regular res 90degree and
>> WG6402 #9A2825-001 deflection yoke
>> 19VLUP22....... used on 6100's and all G08-00X's except the G08-005
>> reg res 100degree
>> 19VNJP22....used on 6401's and G08-005 ?degrees? med res 9A2819-001
>> yoke
>> M48AAW00X .....used on later model AMP's med res ?90degreee? ?yoke?
>>
>> I am trying to figure out if all of this is correct and if maybe the
>> M48AAW00X tube can be used in place of the 19VNJP22, but I dont know
>> the degrees and yoke on the M48AAW00X. Any mods would also be
>> helpful, or info about using standard res in place of med res. I
>> have a G08-005 chassis and yoke, but no tube.
>>
>> Let me know your thoughts and maybe the tube issues and finally be
>> solved,
>> Mark Capps
>> ---------------------------------------------------------------------------
>>
>> ** Unsubscribe, subscribe, or view the archives at
>> http://www.vectorlist.org
>> ** Please direct other questions, comments, or problems to
>> chris@westnet.com
>
>
>
> ---------------------------------------------------------------------------
>
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com
>
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Wed Nov 16 18:29:22 2005