Re: Vector Tube talking sorting out tubes with model #'s

I also thought that but he assured me they were identical.I got the M48
anyway as they didn't have any19v's left
----- Original Message -----
From: "big dog" <catfishh@bellsouth.net>
To: <vectorlist@vectorlist.org>
Sent: Thursday, November 17, 2005 2:28 AM
Subject: Re: VECTOR: Vector Tube talking sorting out tubes with model #'s

> Hi,
>
> I have never tried that. From what I read the M48 was med res?
>
> Mark Capps
>
> simon hanlon wrote:
>
>> Have you tried the 25" tube form star wars on a G08 before?
>> ----- Original Message ----- From: "big dog" <catfishh@bellsouth.net>
>> To: <vectorlist@vectorlist.org>
>> Sent: Thursday, November 17, 2005 1:37 AM
>> Subject: VECTOR: Vector Tube talking sorting out tubes with model #'s
>>
>>
>>> Hi,
>>>
>>> I am trying to get all of the vector tubes sorted out, below are the
>>> tubes I can buy and the info I think is correct?
>>>
>>> 19VLTP22........used on early AMP monitors regular res 90degree and
>>> WG6402 #9A2825-001 deflection yoke
>>> 19VLUP22....... used on 6100's and all G08-00X's except the G08-005 reg
>>> res 100degree
>>> 19VNJP22....used on 6401's and G08-005 ?degrees? med res 9A2819-001
>>> yoke
>>> M48AAW00X .....used on later model AMP's med res ?90degreee? ?yoke?
>>>
>>> I am trying to figure out if all of this is correct and if maybe the
>>> M48AAW00X tube can be used in place of the 19VNJP22, but I dont know the
>>> degrees and yoke on the M48AAW00X. Any mods would also be helpful, or
>>> info about using standard res in place of med res. I have a G08-005
>>> chassis and yoke, but no tube.
>>>
>>> Let me know your thoughts and maybe the tube issues and finally be
>>> solved,
>>> Mark Capps
>>> ---------------------------------------------------------------------------
>>>
>>> ** Unsubscribe, subscribe, or view the archives at
>>> http://www.vectorlist.org
>>> ** Please direct other questions, comments, or problems to
>>> chris@westnet.com
>>
>>
>>
>> ---------------------------------------------------------------------------
>>
>> ** Unsubscribe, subscribe, or view the archives at
>> http://www.vectorlist.org
>> ** Please direct other questions, comments, or problems to
>> chris@westnet.com
>>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Wed Nov 16 18:38:08 2005