Re: Re: Tech WG6100

Hi,

yes i added an extra ground link between all of these quite a while ago...

Pinx

----- Original Message -----
From: "peter jones" <highwayman2000@mail.ru>
To: <vectorlist@vectorlist.org>
Sent: Friday, August 25, 2006 11:32 PM
Subject: VECTOR: Re: VECTOR: Tech WG6100

>
> -----Original Message-----
> From: "Pinx" <pinx.32@tesco.net>
> To: <vectorlist@vectorlist.org>
> Date: Fri, 25 Aug 2006 22:14:23 +0100
> Subject: VECTOR: Tech WG6100
>
>> Hi,
>> i have a WG6100 in my SW cab and quite frequently it decides to die.
>> Latest problem turned out to be a dead Q101 which i replaced along with a
>> load of other parts in the LV section just as a matter of course, it then
>> played perfect for 3 hours solid and was turned off. Turning it back on
>> next day it died again within 10 minutes. So i removed the Deflection pcb
>> yet again only to find the diode at D104 had died (brand new 1N4148) so i
>> replaced this and within another ten minutes the same diode had gone
>> again. Any idea's what could be causing this ?
>> The only things i havent replaced in the LV section are the 2 Zener
>> Diodes that are marked up incorrectly as R104 and R105, though these
>> meter ok out of circuit.
>>
>> TIA,
>>
>>
>> Pinx
>>
>>
>
> make sure you have a good solid ground connection between the monitor,
> gameboard and psu when this type of thing happens.
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sat Aug 26 00:47:37 2006