Rev 2 is the surface mount version (been in production since 2001).
There have only been a couple of reported LV2000 failures (usually due
to parts being knocked loose during shipping).
I replace all broken/non-working LV2000s for free.
On 8/26/06, Pinx <pinx.32@tesco.net> wrote:
> Hi,
>
> I had thought about getting one of these, but there seems to be some
> confusion on how reliable they are, as i have been told that sometimes they
> do die, i have been on Jeffs site and see now that they do a rev2 board,
> does this mean there was a prob and its now been sorted ?
>
>
> Pinx
>
> ----- Original Message -----
> From: "Christopher X. Candreva" <chris@westnet.com>
> To: <vectorlist@vectorlist.org>
> Sent: Saturday, August 26, 2006 2:02 PM
> Subject: Re: VECTOR: Tech WG6100
>
>
> > On Fri, 25 Aug 2006, Pinx wrote:
> >
> >> i have a WG6100 in my SW cab and quite frequently it decides to die.
> >> Latest problem turned out to be a dead Q101 which i replaced along with a
> >> load of other parts in the LV section just as a matter of course, it then
> >
> > Since it sounds like you don't already have one, I would put in an LV2000
> >
> > http://www.geocities.com/jeffhendrix67/lv2000/
> >
> > Makes life much easier, if nothing else will help pinpoint where the other
> > problems are, as it won't fail.
> >
> > ==========================================================
> > Chris Candreva -- chris@westnet.com -- (914) 967-7816
> > WestNet Internet Services of Westchester
> > http://www.westnet.com/
> > ---------------------------------------------------------------------------
> > ** Unsubscribe, subscribe, or view the archives at
> > http://www.vectorlist.org
> > ** Please direct other questions, comments, or problems to
> > chris@westnet.com
> >
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to chris@westnet.com
>
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Mon Aug 28 13:24:24 2006
This archive was generated by hypermail 2.1.8 : Mon Aug 28 2006 - 16:50:02 EDT