Re: Tech WG6100

Hi,

I had thought about getting one of these, but there seems to be some
confusion on how reliable they are, as i have been told that sometimes they
do die, i have been on Jeffs site and see now that they do a rev2 board,
does this mean there was a prob and its now been sorted ?

Pinx

----- Original Message -----
From: "Christopher X. Candreva" <chris@westnet.com>
To: <vectorlist@vectorlist.org>
Sent: Saturday, August 26, 2006 2:02 PM
Subject: Re: VECTOR: Tech WG6100

> On Fri, 25 Aug 2006, Pinx wrote:
>
>> i have a WG6100 in my SW cab and quite frequently it decides to die.
>> Latest problem turned out to be a dead Q101 which i replaced along with a
>> load of other parts in the LV section just as a matter of course, it then
>
> Since it sounds like you don't already have one, I would put in an LV2000
>
> http://www.geocities.com/jeffhendrix67/lv2000/
>
> Makes life much easier, if nothing else will help pinpoint where the other
> problems are, as it won't fail.
>
> ==========================================================
> Chris Candreva -- chris@westnet.com -- (914) 967-7816
> WestNet Internet Services of Westchester
> http://www.westnet.com/
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sat Aug 26 15:48:09 2006