Re: Battlezone AVG board - capacitor mod

Its your lucky day. I'm sitting here doing battlezone repairs too. The
markings show 39 plus or minus 5% at A10 (CD is also on there, is that the
brand?), 47 plus or minus 5% at D10 (CDA is on there). I hope this helps.

Mark Hooks
----- Original Message -----
From: "Phil Morris" <arcaderelics@irongiant.org.uk>
To: <vectorlist@vectorlist.org>
Sent: Sunday, September 03, 2006 10:32 AM
Subject: VECTOR: Battlezone AVG board - capacitor mod

> I've noticed on some Battlezone AVG boards that the TL082's at locations
> A10 and D10 often (but not always) have an additional (purple mylar?)
> capacitor bridged across pins 1 and 2.
>
> Now I have a board where the cap has been broken off (the stubs of the
> legs remain on pins 1 and 2) but I've never noted down the value before -
> what value and type of cap should this be? There's no indication of it on
> the schematics.
>
> Also, would both TL082's have the same value cap?
>
>
> Thanks,
> Phil
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sun Sep 3 12:14:49 2006