G-08 rebuild kit potential BOM

All that is interested:

Normal caps:

1 Nichicon - LLS2C102MELZ - CAP 1000UF 160V ELECT LS SNAP
6 Panasonic - ECA-1HM100 - CAP 10UF 50V ALUM LYTIC RADIAL
1 Panasonic - EEU-EE2V220 - CAP 22UF 350V ELECT EE RADIAL
2 Panasonic - ECA-1VM470 - CAP 47UF 35V ALUM LYTIC RADIAL
2 Panasonic - ECE-A1VKG4R7 - KG RAD ALUM ELEC CAP 4.7MFD 35V
2 Panasonic - ECA-1VM220 - CAP 22UF 35V ALUM LYTIC RADIAL
1 Panasonic - EEU-FC1V101 - CAP 100UF 35V ELECT FC RADIAL
1 Panasonic - EB2D470 - CAP 47UF 200V ELECT EB RADIAL

Big ones:

1 Panasonic - ECE-T2GP681FA - CAP 680UF 400V ELECT TUP
2 Panasonic - ECE-T1KA682EA - CAP 6800UF 80V ELECT THA SERIES

Def transistors:

4 ON Semiconductor - MJ15003G - TRANS PWR NPN 20A 140V TO3

Cermaic resistors:

2 OHMITE - B20J3R0E - 3ohm 20W Ceramic

I included the two ceramic resistors to replace the teepees I've seen on a
lot of deflection boards. However, they add $10.00 to the price, so if
you want me to leave them off, that is fine. Also, I was think of
doubling the amount of deflection transistors so you could do the doubling
mod spelled out in the G08 FAQ. It would add about $15.

The normal caps will be around $10, the big ones around $30.

So we are talking about $65 for everything listed above. $80 for double
the transistors.

It might be cheaper once I get everything ordered with quantity breaks,
etc, but what I listed is worst case. I'm not trying to profit with this
exercise.

Please give me input. Any other common failure parts that everyone wants?

Thanks!

Mit
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Mon Jul 21 16:44:05 2008