Re: WG6100 issue

Thanks, the text on the resistors says: RGN10 1.5 OhmsJ and next line NOBLE 17. It looks as if those are the original one's. Can't find anything on google with this info....maybe some 6100 can verify these are original or not ?  

Here's a picture of the deflection board before I started working on it (and cleaned it):

web.jpg

Thanks, André

Op 13 apr 2009, om 23:23 heeft Scott Swazey het volgende geschreven:

IIRC, Some of the parts were stamped "NI".  Just read the part number off the resistor and look it up on Google.

-Scott


At 02:11 PM 4/13/2009, Andre Huijts wrote:

That is a brilliant hint, thanks !

Stupid from me as I've read about this before but thought it was

Amplifone only....

Gonna check it out. Anyway I can recognize if they're non-inductive or

not ?

Thanks !

Op 13 apr 2009, om 22:43 heeft Scott Swazey het volgende geschreven:

> Check the two big 10W resistors.  It should be a non-inductive part.

>

> -Scott

>

> At 10:58 AM 4/13/2009, you wrote:

>> I'm working on this WG6100 where some vectors (esp. on the letters)

>> seem to be badly drawn.

>>

>> Check out this very short video:

>>

>> http://www.youtube.com/watch?v=_pmbmheq7Gg

>>

>> Note the W and the other letters don't look as nice as on my

>> Amplifone.

>>

>> The PCB set is normally running in my cockpit and working fine on my

>> 25" Amplifone so it's not a PCB issue.

>> The WG6100 has a LV2000 installed, cap-kit and redone all solderings

>> on deflection and neck pcb.

>> LV2000 voltages are exactly set at 26.00V and -26.00V

>> As mentioned PCB set works fine, BIP is correctly set-up.

>>

>> Is this because of WG's lower slew-rate or can something be done to

>> correct this ?

>>

>> Thanks.

>> ---------------------------------------------------------------------------

>> ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org

>> ** Please direct other questions, comments, or problems to chris@westnet.com

>

> ---------------------------------------------------------------------------

> ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org

> ** Please direct other questions, comments, or problems to chris@westnet.com

André Huijts

andre.huijts@upcmail.nl

---------------------------------------------------------------------------

** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org

** Please direct other questions, comments, or problems to chris@westnet.com

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com

André Huijts

andre.huijts@upcmail.nl

No virus found in this incoming message.
Checked by AVG - www.avg.com 
Version: 8.5.285 / Virus Database: 270.11.56/2058 - Release Date: 04/14/09 06:17:00