Re: Tech Star Wars Help

From: Kevin Moore <talon.k_at_gmail.com>
Date: Fri Sep 18 2009 - 09:14:56 EDT

Without seeing it, I'm just going to be guesing, but on mine this is
generally caused by the pots on the SW board. The X-Y adjustements. You may
try moving the pots back an forth a few times to help make a better
connection?

On Fri, Sep 18, 2009 at 7:40 AM, Frank Zapotoczny <fzzap@aol.com> wrote:

> Kind of both directions up and down and left and right. I recapped the
> boards a long time ago and I was going to try that to start along with
> resoldering the connectors. I will try to get a video today. But it did’t
> look like the vector lines were moving but that the whole picture was
> jumping.
>
>
> ------------------------------
>
> *From:* owner-vectorlist@vectorlist.org [mailto:
> owner-vectorlist@vectorlist.org] *On Behalf Of *Andre Huijts
> *Sent:* Friday, September 18, 2009 1:36 AM
> *To:* vectorlist@vectorlist.org
> *Subject:* Re: VECTOR: Tech Star Wars Help
>
>
>
> A video would sure help. Could you describe how it jumps
> (left-right/up-down or other way)?
>
>
>
>
>
>
>
>
>
> Op 18 sep 2009, om 03:50 heeft Frank Zapotoczny het volgende geschreven:
>
>
>
> I have a Star Wars upright with a Amplifone monitor. It has a wintron HV
> installed and had worked great for many years. It has been sitting for a
> about a year without being played.
>
>
>
> I turned it on to play a few games and the picture came up and looked
> great but after a few seconds the picture began jumping around and getting
> shaky. After about 5-10 minutes it stopped moving around and looked great
> again. Then after a few more minutes it started jumping around again.
>
>
>
> Can you guys give me a suggestion on where to start looking.
>
>
>
> Thanks in advance for any help/
>
>
>
> Frank
>
>
>
> André Huijts
>
> andre.huijts@upcmail.nl
>
>
>
>
>
>
>
>
> =

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Fri Sep 18 09:14:59 2009

This archive was generated by hypermail 2.1.8 : Fri Sep 18 2009 - 09:50:00 EDT