RE: Tech Star Wars Help

Kevin,

 The first thing I tried was the pots on the deflection board. I didn’t try
the pots on the board set itself. I did recap the deflection and HV boards
about 10 yrs ago. I was going to start with recapping first along with
reflowing the connections.

  _____

From: owner-vectorlist@vectorlist.org
[mailto:owner-vectorlist@vectorlist.org] On Behalf Of Kevin Moore
Sent: Friday, September 18, 2009 9:15 AM
To: vectorlist@vectorlist.org
Subject: Re: VECTOR: Tech Star Wars Help

Without seeing it, I'm just going to be guesing, but on mine this is
generally caused by the pots on the SW board. The X-Y adjustements. You may
try moving the pots back an forth a few times to help make a better
connection?

On Fri, Sep 18, 2009 at 7:40 AM, Frank Zapotoczny <fzzap@aol.com> wrote:

Kind of both directions up and down and left and right. I recapped the
boards a long time ago and I was going to try that to start along with
resoldering the connectors. I will try to get a video today. But it did’t
look like the vector lines were moving but that the whole picture was
jumping.

  _____

From: owner-vectorlist@vectorlist.org
[mailto:owner-vectorlist@vectorlist.org] On Behalf Of Andre Huijts
Sent: Friday, September 18, 2009 1:36 AM
To: vectorlist@vectorlist.org
Subject: Re: VECTOR: Tech Star Wars Help

A video would sure help. Could you describe how it jumps (left-right/up-down
or other way)?

Op 18 sep 2009, om 03:50 heeft Frank Zapotoczny het volgende geschreven:

I have a Star Wars upright with a Amplifone monitor. It has a wintron HV
installed and had worked great for many years. It has been sitting for a
about a year without being played.

 I turned it on to play a few games and the picture came up and looked great
but after a few seconds the picture began jumping around and getting shaky.
After about 5-10 minutes it stopped moving around and looked great again.
Then after a few more minutes it started jumping around again.

 Can you guys give me a suggestion on where to start looking.

Thanks in advance for any help/

Frank

André Huijts

andre.huijts@upcmail.nl

=

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Fri Sep 18 09:47:18 2009