Re: Anyone have a neckboard or a connector for a 19VLUP22?

Hi Ian,

I have a spare 6100 neckboard lying about. Send me your address and I will
mail it to you.

-Werner

--------------------------------------------------
From: "Mr Ian Primus" <ian_primus@yahoo.com>
Sent: Sunday, July 18, 2010 8:47 AM
To: <vectorlist@vectorlist.org>
Subject: Re: VECTOR: Anyone have a neckboard or a connector for a 19VLUP22?

> --- On Sun, 7/18/10, Andrew Welburn <andy@andysarcade.net> wrote:
>
>> I know it might sound like a real
>> insult, but i have to ask as i had someone reporting
>> similar problems who was convinced it was a tube problem...
>> Have you cleaned the face of the CRT and both sides of the
>> montor bezel/glass through which you are viewing it?
>>
>> A suitably dirty/dusty screen will make everything bright
>> apear fuzzy and defocussed...
>
> Hehe. Yeah, I cleaned it. This game was really filthy. But yes, I did
> clean the tube and both sides of the glass. And it's still fuzzy when
> looking at the tube directly, no tinted glass.
>
> I'm positive it's the tube. I've worked with monitors and televisions long
> enough to know a worn tube when I see one. The "fuzzy vector" problem is
> most pronounced on the green. Blue is weaker than green, and even with the
> cutoff and drive controls adjusted for best picture (using the test screen
> with the intensity test), the "dim blue" is almost invisible. If I crank
> stuff up any further I start to get a dot in the center of that color,
> then retrace lines.
>
> -Ian
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sun Jul 18 10:13:48 2010