Re: Tempest X,Y size

I should mention also that all my vector boards get worked on / tested on a
Pat9000 So the setup is the same for all boards. So pretty much any problem
I working on is board related :)

On Mon, Aug 23, 2010 at 11:44 AM, John Robertson <pinball@telus.net> wrote:

> Kevin Moore wrote:
>
>> Having a strange issue with a Tempest. The X, and Y size is to big. I can
>> adjust the size smaller, or larger but I can't get it small enough to fit on
>> the screen. It's got new adjustment pots and the picture looks fine. It's
>> just to big.
>>
>> Any ideas?
>>
>> Thanks,
>>
>> Kevin
>>
>> Check the HV going to the picture tube anode. If it is too low your
> picture will 'bloom'...
>
> John :-#)#
>
> --
> John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call
> (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
> www.flippers.com "Old pinballers never die, they just flip
> out"
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Mon Aug 23 12:48:11 2010