Re: Tempest X,Y size

Kevin Moore wrote:
> I should mention also that all my vector boards get worked on / tested
> on a Pat9000 So the setup is the same for all boards. So pretty much
> any problem I working on is board related :)
>

Fair enough...I would like to assume you checked the on-board voltage
regulator outputs and they are correct...

Change any CMOS switches recently?

John :-#)#
>
> On Mon, Aug 23, 2010 at 11:44 AM, John Robertson <pinball@telus.net
> <mailto:pinball@telus.net>> wrote:
>
> Kevin Moore wrote:
>
> Having a strange issue with a Tempest. The X, and Y size is to
> big. I can adjust the size smaller, or larger but I can't get
> it small enough to fit on the screen. It's got new adjustment
> pots and the picture looks fine. It's just to big.
>
> Any ideas?
>
> Thanks,
>
> Kevin
>
> Check the HV going to the picture tube anode. If it is too low
> your picture will 'bloom'...
>
> John :-#)#...
>
>

-- 
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
                 www.flippers.com 
"Old pinballers never die, they just flip out"
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com