Check original red/blue and yellow/green resistance and compare to plug positions on new one. (If that's the combo you did) if the same you should be fine.
Sent wirelessly from my BlackBerry device on the Bell network.
Envoyé sans fil par mon terminal mobile BlackBerry sur le réseau de Bell.
-----Original Message-----
From: "Rich Harkoff" <rharkoff1@new.rr.com>
Sender: owner-vectorlist@vectorlist.org
Date: Tue, 31 Aug 2010 15:19:58
To: <vectorlist@vectorlist.org>
Reply-To: vectorlist@vectorlist.orgSubject: VECTOR: 6100 yoke question
Hello,
I borrowed a 6100 yoke to try on my SW cockpit 25" amp, when I got it home I noticed the wire colors on the plug were different than the yoke that came with game. The numbers on the yoke match closely 9A2806-001D 17-8234, 9A2806-001A 17-8140.
I took the covers off and although the color code is different they are wired the same to the plug. They both ohm out the same also. Do anyone here think it is safe to used the borrowed yoke in my game. I'm having a difficult time with convergence, not even close, and was thinking the yoke might be a problem.
Thanks
Rich
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Tue Aug 31 17:03:08 2010
This archive was generated by hypermail 2.1.8 : Tue Aug 31 2010 - 19:50:01 EDT