Re: 6100 yoke question

Hi All, new here. Couple people on the KLOV forums turned me on to this, my handle over there is DPTwiz  I have read some of you want a reproduction of the 4 player eliminator cocktail? I am a collector, and also have a hobby business reproducing cabinets. If any of you have an eliminator cocktail, and provide pictures and detailed plans, i can make them. I can also work with .AI , .DXF. and Shopbot files. Here's my site if you guys would like to see some of my work, www.arcaderestoparts.com thanks, Brett ________________________________ From: "livnfree_can@yahoo.com" <livnfree_can@yahoo.com> To: vectorlist@vectorlist.org Sent: Tue, August 31, 2010 5:03:05 PM Subject: Re: VECTOR: 6100 yoke question Check original red/blue and yellow/green resistance and compare to plug positions on new one. (If that's the combo you did) if the same you should be fine. Sent wirelessly from my BlackBerry device on the Bell network. Envoyé sans fil par mon terminal mobile BlackBerry sur le réseau de Bell. ________________________________ From: "Rich Harkoff" <rharkoff1@new.rr.com> Sender: owner-vectorlist@vectorlist.org Date: Tue, 31 Aug 2010 15:19:58 -0500 To: <vectorlist@vectorlist.org> ReplyTo: vectorlist@vectorlist.org Subject: VECTOR: 6100 yoke question Hello, I borrowed a 6100 yoke to try on my SW cockpit 25" amp, when I got it home I noticed the wire colors on the plug were different than the yoke that came with game. The numbers on the yoke match closely 9A2806-001D 17-8234, 9A2806-001A 17-8140. I took the covers off and although the color code is different they are wired the same to the plug. They both ohm out the same also. Do anyone here think it is safe to used the borrowed yoke in my game. I'm having a difficult time with convergence, not even close, and was thinking the yoke might be a problem.   Thanks Rich
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Tue Aug 31 18:54:01 2010