sure..hook a 12v 10A or so car battery charger to the red and blue wires
and let it sit for 10 minutes or so.. It will melt the glue.
> Thanks, that is useful information. Is it not possible to remove a
> glued on raster yoke and replace it with an original amplifone one?
> (assuming one can be located) I've seen a few of these A48AAB13X02
> tubes around.
>
> On Sun, May 15, 2011 at 11:29 PM, Rodger Boots <rlboots2@gmail.com> wrote:
>> Almost no chance it would work in a vector monitor. The 02 at the end
>> of
>> the tube number indicates it probably comes with a yoke glued on. Great
>> for
>> convergence (not adjustable, done at the factory), but guaranteed to be
>> a
>> raster yoke.
>>
>> On May 14, 2011 9:53 PM, "Xyla DuVal" <xduval@xyla.net> wrote:
>>> Hi all,
>>>
>>> Someone is selling a medium res monitor on KLOV, and in the photo you
>>> can see the tube model. Its a little hard to make out, but it seems
>>> to say A48AAB13X02. Here is the post:
>>>
>>> http://forums.klov.net/showthread.php?t=183905
>>>
>>> I can't find any information on this tube that confirms it really is
>>> medium res, but if it is I am wondering what the chances are that it
>>> could be used in an Amplifone instead of the M48AAW00X. I'm guessing
>>> that there is probably some reason it won't work since I can't find
>>> any information to suggest it will. According to the chart at
>>> http://www.junknet.net/donor-tvs it is a CR-23(Fat neck/standard), but
>>> I don't know what kind of neck the M48AAW00X has. The fact it is
>>> listed on that chart is the main reason I am questioning whether it is
>>> even a real medium res tube... why would an old RCA TV be medium res?
>>>
>>> Does anyone have any thoughts on this? I'd love to be able to put
>>> together an Amplifone but it seems questionable that I will be able to
>>> find an M48AAW00X any time soon.
>>>
>>> Thanks!
>>>
>>> ---------------------------------------------------------------------------
>>> ** Unsubscribe, subscribe, or view the archives at
>>> http://www.vectorlist.org
>>> ** Please direct other questions, comments, or problems to
>>> chris@westnet.com
>>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com
>
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Mon May 16 22:18:12 2011
This archive was generated by hypermail 2.1.8 : Mon May 16 2011 - 23:50:01 EDT