RE: Another K6100 HV question

Good page, I dug around on it a bit and noticed your also missing a source
for Q905 (2n6557 obsolete). As far as I can see the suggested replacement
is MJE15030 but it requires either a board mod or leg crossing.

And BU207 (Q906).

From: owner-vectorlist@vectorlist.org
[mailto:owner-vectorlist@vectorlist.org] On Behalf Of William Boucher
Sent: Sunday, October 09, 2011 9:23 AM
To: vectorlist@vectorlist.org
Subject: Re: VECTOR: Another K6100 HV question

Lots of good folks already answered your question but just in case...

I have a list of replacement parts for the wg6100 on a webpage here:

http://www.biltronix.com/arcade_electcomp_01.html#wg6100_rebuild_parts

This list includes the 150V zener as this

 
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail?name=1N5383BRLGO
SCT-ND

Looks like I neglected to show a source for Q900. I'll have to fix that.

William Boucher
http://www.biltronix.com

----- Original Message -----

From: David Shoemaker <mailto:davids@oz.net>

To: vectorlist@vectorlist.org

Sent: Sunday, October 09, 2011 1:05 AM

Subject: VECTOR: Another K6100 HV question

As I was on a roll I figured I would take a crack at another of my HV units.

No stable HV, B+ is shifting around.

I traced back to Q900 (BU409) and found it to have bad voltages (+ / - 26V
on all three legs). Figured it was shorted so replaced it with a known
good.

Turned the monitor on and got HV crackle, YAY I thought. Then I heard snap
and smelled the magic smoke. BOO.

BU409 now giving the same values as before.

I have recapped the HV and replaced Q901, 902.

Anyone have a reasonable source for BU409's? And any ideas of what is
blowing them?

And while I am at it, source for the 150V 1w zeners?

Thanks,

David

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Sun Oct 9 17:41:32 2011