Re: sencore cr70 repair

Darren Finck wrote:
> John--I have a couple of Sencore CR31 Super Mack items you can add to
> your FTP archive...
>
> A list of CR31 set-up data:
> http://www.finck.net/arcade/sencore_cr31_setup.zip
> A scan of the CR31 schematics:
> http://www.finck.net/arcade/Schematic_-_Sencore_CR31A_Super_Mack.pdf
>
> Couldn't find either of these items elsewhere on the 'net, so I put
> them on my domain.
>

Added to TTL, thanks!

John :-#)#
> --- On *Tue, 1/15/13, John Robertson /<pinball@telus.net>/* wrote:
>
>
> From: John Robertson <pinball@telus.net>
> Subject: Re: VECTOR: sencore cr70 repair
> To: vectorlist@vectorlist.org
> Date: Tuesday, January 15, 2013, 12:19 PM
>
> If she does I have created a section for Sencore on the TTL ftp
> site that this could be added to...
>
> ftp://ttl.arcadetech.org/TTL/Test_Equipment/
>
> John :-#)#
>
> Joey Oravec wrote:
>> I got ahold of Sencore today. Unfortunately (like I expected) the
>> CR70 is "obsolete and we cannot accept it for repair". The lady
>> was pretty nice and she's looking around to see if there's any
>> service information or a calibration procedure, but it's not too
>> optimistic.
>>
>> I already have the schematics, parts list, and manual but there
>> are various pots that surely need adjustment after changing out
>> components. Hopefully she finds that procedure.
>>
>> -joey
>>
>> On Mon, Jan 14, 2013 at 3:02 PM, Louis Srianomai
>> <louisurfer@yahoo.com </mc/compose?to=louisurfer@yahoo.com>> wrote:
>>
>> I sent mine in to sencore itself a few years back. With
>> return shipping it was a couple hundred bucks.
>>
>> ------------------------------------------------------------------------
>> *From:* Joey Oravec <joeyoravec@gmail.com
>> </mc/compose?to=joeyoravec@gmail.com>>
>> *To:* vectorlist@vectorlist.org
>> </mc/compose?to=vectorlist@vectorlist.org>
>> *Sent:* Monday, January 14, 2013 11:55 AM
>> *Subject:* VECTOR: sencore cr70 repair
>>
>> Does anybody know of somewhere in the USA that can repair and
>> calibrate Sencore CR70 CRT rejuvinators? Mine has something
>> wrong on the green cutoff test. The needle spikes low and
>> cannot be adjusted.
>>
>> I'd consider digging in and trying to fix it, but there are a
>> bunch of adjustable pots and I didn't see a calibration or
>> self-test procedure in the user manual or the repair manual.
>> Without a self-test or calibration it seems like a shotgun
>> repair might end up doing it more harm than good.
>>
>> -joey
>>
>>
>>
>
>
> --
> John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9
> Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
> www.flippers.com <http://www.flippers.com>
> "Old pinballers never die, they just flip out"
>
>

-- 
John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 
Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, VideoGames)
                 www.flippers.com 
"Old pinballers never die, they just flip out"
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com