Re: Can someone please confirm this is correct? Replacing MPSU07 and MPSU57

FANTASTIC . . . .

On Thu, Feb 7, 2013 at 4:13 PM, Pat Danis <patdanis@verizon.net> wrote:
> I have seen Deflection boards with those in there with twisted pins.
> Granted (no pun intended) they were non-working at the time I got them and I
> replaced them with the correct part numbers. Don't know if they ever
> worked.
>
> Pat
>
>
> On 2/7/2013 1:11 PM, Grant Thienemann wrote:
>>
>> Well crap, I just placed the order so I guess we will see . . .
>>
>> On Thu, Feb 7, 2013 at 1:59 PM, Andreas Kraemer
>> <andi_kraemer@t-online.de> wrote:
>>>
>>> Not sure about this, if you haven’t tried it actually.
>>> The MPSU07 and MPSU57 can handle higher frequencies much better
>>> Their Voltage-Gain-Bandwidth-Product is 50Mhz min., while the TIP31C/32C
>>> have only 3Mhz min.
>>>
>>> - Andreas
>>>
>>> From: Rodger Boots
>>> Sent: Thursday, February 07, 2013 7:38 PM
>>> To: vectorlist@vectorlist.org
>>> Subject: Re: VECTOR: Can someone please confirm this is correct?
>>> Replacing
>>> MPSU07 and MPSU57
>>>
>>>
>>> Should work fine.
>>>
>>> On Feb 7, 2013 12:34 PM, "Grant Thienemann" <grant.thienemann@gmail.com>
>>> wrote:
>>>>
>>>> Hey Guys,
>>>>
>>>> I'm working on a couple of amplifones and I I'm going to completely
>>>> rebuild one from the ground up and I want to replace the MPSU07 and
>>>> MPSU57.
>>>>
>>>> I'm looking at TIP31C and TIP32C to replace them, and I was going to
>>>> use a model that can handle more voltage as well, specifically this
>>>> one:
>>>>
>>>> http://www.digikey.com/product-detail/en/TIP31C/TIP31CFS-ND/458805
>>>>
>>>> Now MPSU07 has a E-B-C pint out and the TIP31C has a B-C-E pin out, I
>>>> can just rearrange the pins to make this work correct?
>>>>
>>>> Same thing for the MPSU57, I'm looking to replace them with this:
>>>>
>>>> http://www.digikey.com/product-detail/en/TIP32C/TIP32CFS-ND/458807
>>>>
>>>> Please let me know if this is correct and if I can just shift the pins
>>>> around to make it work!
>>>>
>>>> Thanks
>>>> Grant
>>>>
>>>>
>>>> ---------------------------------------------------------------------------
>>>> ** Unsubscribe, subscribe, or view the archives at
>>>> http://www.vectorlist.org
>>>> ** Please direct other questions, comments, or problems to
>>>> chris@westnet.com
>>
>>
>> ---------------------------------------------------------------------------
>> ** Unsubscribe, subscribe, or view the archives at
>> http://www.vectorlist.org
>> ** Please direct other questions, comments, or problems to
>> chris@westnet.com
>>
>
>
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to chris@westnet.com

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Thu Feb 7 16:29:51 2013