Re: Can someone please confirm this is correct? Replacing MPSU07 and MPSU57

I have seen Deflection boards with those in there with twisted pins.
Granted (no pun intended) they were non-working at the time I got them
and I replaced them with the correct part numbers. Don't know if they
ever worked.

Pat

On 2/7/2013 1:11 PM, Grant Thienemann wrote:
> Well crap, I just placed the order so I guess we will see . . .
>
> On Thu, Feb 7, 2013 at 1:59 PM, Andreas Kraemer
> <andi_kraemer@t-online.de> wrote:
>> Not sure about this, if you haven’t tried it actually.
>> The MPSU07 and MPSU57 can handle higher frequencies much better
>> Their Voltage-Gain-Bandwidth-Product is 50Mhz min., while the TIP31C/32C
>> have only 3Mhz min.
>>
>> - Andreas
>>
>> From: Rodger Boots
>> Sent: Thursday, February 07, 2013 7:38 PM
>> To: vectorlist@vectorlist.org
>> Subject: Re: VECTOR: Can someone please confirm this is correct? Replacing
>> MPSU07 and MPSU57
>>
>>
>> Should work fine.
>>
>> On Feb 7, 2013 12:34 PM, "Grant Thienemann" <grant.thienemann@gmail.com>
>> wrote:
>>> Hey Guys,
>>>
>>> I'm working on a couple of amplifones and I I'm going to completely
>>> rebuild one from the ground up and I want to replace the MPSU07 and
>>> MPSU57.
>>>
>>> I'm looking at TIP31C and TIP32C to replace them, and I was going to
>>> use a model that can handle more voltage as well, specifically this
>>> one:
>>>
>>> http://www.digikey.com/product-detail/en/TIP31C/TIP31CFS-ND/458805
>>>
>>> Now MPSU07 has a E-B-C pint out and the TIP31C has a B-C-E pin out, I
>>> can just rearrange the pins to make this work correct?
>>>
>>> Same thing for the MPSU57, I'm looking to replace them with this:
>>>
>>> http://www.digikey.com/product-detail/en/TIP32C/TIP32CFS-ND/458807
>>>
>>> Please let me know if this is correct and if I can just shift the pins
>>> around to make it work!
>>>
>>> Thanks
>>> Grant
>>>
>>> ---------------------------------------------------------------------------
>>> ** Unsubscribe, subscribe, or view the archives at
>>> http://www.vectorlist.org
>>> ** Please direct other questions, comments, or problems to
>>> chris@westnet.com
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to chris@westnet.com
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Thu Feb 7 16:14:21 2013