Well crap, I just placed the order so I guess we will see . . .
On Thu, Feb 7, 2013 at 1:59 PM, Andreas Kraemer
<andi_kraemer@t-online.de> wrote:
> Not sure about this, if you haven’t tried it actually.
> The MPSU07 and MPSU57 can handle higher frequencies much better
> Their Voltage-Gain-Bandwidth-Product is 50Mhz min., while the TIP31C/32C
> have only 3Mhz min.
>
> - Andreas
>
> From: Rodger Boots
> Sent: Thursday, February 07, 2013 7:38 PM
> To: vectorlist@vectorlist.org
> Subject: Re: VECTOR: Can someone please confirm this is correct? Replacing
> MPSU07 and MPSU57
>
>
> Should work fine.
>
> On Feb 7, 2013 12:34 PM, "Grant Thienemann" <grant.thienemann@gmail.com>
> wrote:
>>
>> Hey Guys,
>>
>> I'm working on a couple of amplifones and I I'm going to completely
>> rebuild one from the ground up and I want to replace the MPSU07 and
>> MPSU57.
>>
>> I'm looking at TIP31C and TIP32C to replace them, and I was going to
>> use a model that can handle more voltage as well, specifically this
>> one:
>>
>> http://www.digikey.com/product-detail/en/TIP31C/TIP31CFS-ND/458805
>>
>> Now MPSU07 has a E-B-C pint out and the TIP31C has a B-C-E pin out, I
>> can just rearrange the pins to make this work correct?
>>
>> Same thing for the MPSU57, I'm looking to replace them with this:
>>
>> http://www.digikey.com/product-detail/en/TIP32C/TIP32CFS-ND/458807
>>
>> Please let me know if this is correct and if I can just shift the pins
>> around to make it work!
>>
>> Thanks
>> Grant
>>
>> ---------------------------------------------------------------------------
>> ** Unsubscribe, subscribe, or view the archives at
>> http://www.vectorlist.org
>> ** Please direct other questions, comments, or problems to
>> chris@westnet.com
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Thu Feb 7 14:11:41 2013
This archive was generated by hypermail 2.1.8 : Thu Feb 07 2013 - 16:50:01 EST