Re: Unraveling the Star Wars harness

From: Douglas Gauck <douglas_at_gauck.com>
Date: Wed Jul 31 2013 - 23:00:56 EDT

Sorry I meant the six pin connectors on the ARII.

The other 15 pos in the last photo is to the utility panel for volume, service, test, counter, etc. You've got me stumped on the middle photo.

-Douglas

Sent from my iPhone

On Jul 31, 2013, at 5:11 PM, Joel Griffin Dodd <griffindodd@gmail.com> wrote:

> Yeah I saw they were the same. I looked for pictures of them plugged in online. Looks like my ar2 is toast anyway though
>
> On Jul 31, 2013 1:11 PM, "Douglas Gauck" <douglas@gauck.com> wrote:
>> Make sure you don't mix up the 9 pin plugs on the ARII board!
>>
>> -Douglas
>>
>> Sent from my iPhone
>>
>> On Jul 31, 2013, at 2:50 PM, Jimmy Ipock <jipock@gmail.com> wrote:
>>
>>> I believe one of those plugs..the large one is the vector monitor connector.
>>> The smaller plug on the PS is the 110/220v selection plug.
>>>
>>>
>>>
>>> On Wed, Jul 31, 2013 at 8:27 AM, Joel Griffin Dodd <griffindodd@gmail.com> wrote:
>>>> Hi guys.
>>>>
>>>> I'm trying to piece together an entire star wars cabinet and have had a lot of success gathering everything (special thanks to Pat).
>>>>
>>>> Connecting up my wiring harness I have everything plugged in except for speakers and monitor and I'm a little confused about the plugs I have left over. I've attached pictures of the three plugs I'm still trying to identify. I assume one is to the amplifone one to the speakers and other mystery things not sure on the third.
>>>>
>>>> Can you identify these remaining plugs?

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Wed Jul 31 23:00:59 2013

This archive was generated by hypermail 2.1.8 : Wed Jul 31 2013 - 23:50:00 EDT