Re: Unraveling the Star Wars harness

From: Pat Danis <patdanis_at_verizon.net>
Date: Wed Jul 31 2013 - 23:48:32 EDT

I have nothing here at the house that is Star WArs any more except for a few parts.  I'm thinking perhaps the second photo might be for the control panel?  Just a guess. 

Pat

Yeah I saw they were the same.  I looked for pictures of them plugged in online. Looks like my ar2 is toast anyway though

On Jul 31, 2013 1:11 PM, "Douglas Gauck" <douglas@gauck.com> wrote:

Make sure you don't mix up the 9 pin plugs on the ARII board!

-Douglas

Sent from my iPhone

On Jul 31, 2013, at 2:50 PM, Jimmy Ipock <jipock@gmail.com> wrote:

I believe one of those plugs..the large one is the vector monitor connector.

The smaller plug on the PS is the 110/220v selection plug.

On Wed, Jul 31, 2013 at 8:27 AM, Joel Griffin Dodd <griffindodd@gmail.com> wrote:

Hi guys. 

I'm trying to piece together an entire star wars cabinet and have had a lot of success gathering everything (special thanks to Pat).

Connecting up my wiring harness I have everything plugged in except for speakers and monitor and I'm a little confused about the plugs I have left over.  I've attached pictures of the three plugs I'm still trying to identify.  I assume one is to the amplifone one to the speakers and other mystery things not sure on the third.

Can you identify these remaining plugs? 

--------------------------------------------------------------------------- ** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org ** Please direct other questions, comments, or problems to chris@westnet.com Received on Wed Jul 31 23:48:53 2013