RE: Fluke 9010A Input voltage

There *must* be something on the outside, I bought two 9010a's from the US
and I certainly didn't open the case to change the voltage! My 9010a's are
in the garage loft at the moment, and there's a car in it so I can't drag
either out to check!

Is there one of those rotate to voltage type things? Maybe it's the 9100a
that has a plastic cover and plug to change the voltage?

-----Original Message-----
From: techtoolslist-bounces@flippers.com
[mailto:techtoolslist-bounces@flippers.com] On Behalf Of Filip Hautekeete
Sent: 31 October 2005 19:08
To: Technical Tools Mail List
Subject: Re: [Techtoolslist] Fluke 9010A Input voltage

Steve,

There is no panel nor switch on the back. However there is a note referring
to the manual (orientation of the mains circuit board). Unfortunately I was
not able to locate any information about this in the service manual. I was
hoping someone had done this before and could tell me immediately what
actions to perform.

Best regards,

Filip

----- Original Message -----

From: Steve C <mailto:steves-lists@dsl.pipex.com>

To: 'Technical <mailto:techtoolslist@flippers.com> Tools Mail List'

Sent: Monday, October 31, 2005 7:59 PM

Subject: RE: [Techtoolslist] Fluke 9010A Input voltage

Yes, there is a panel on the back that allows voltage selection - I can't
remember how but it was easy.

Steve

-----Original Message-----
From: techtoolslist-bounces@flippers.com
[mailto:techtoolslist-bounces@flippers.com] On Behalf Of Filip Hautekeete
Sent: 31 October 2005 13:27
To: techtoolslist@flippers.com
Subject: [Techtoolslist] Fluke 9010A Input voltage

Hi all,

Is there any easy way to switch the Fluke 9010A from VAC 120 (factory
installed) to VAC 240 ?

Best regards,

Filip

  _____

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist

_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Mon Oct 31 14:52:17 2005