Be careful, a lot of times when you change voltage you also should
change the fuse.
In the case of the 9010A the line fuse should be 1A fast blow for 120 V
and 1/2 A fast blow for 240 V.
Filip Hautekeete wrote:
> Hello Steve,
>
> You are correct. Thanks to John Robertson I figured out there is a
> slide card for voltage selection behind the fuse panel. No need to
> drag the systems out of your garage ;-)
>
> Thanks for your help!
>
> Filip
_______________________________________________
Techtoolslist mailing list
Techtoolslist@flippers.com
http://seven.pairlist.net/mailman/listinfo/techtoolslist
Received on Mon Oct 31 16:39:33 2005
This archive was generated by hypermail 2.1.8 : Mon Oct 31 2005 - 17:50:00 EST