Maybe I'm just missing the section that describes them, but I haven't found it mentioned yet. I looked in the 4600 and 4900 manuals with no luck, but I'll try the G07 ones I have.
Jon
At 07:20 PM 8/20/2000 -0500, you wrote:
>Jon Raiford wrote:
> >
> > You say that you were able to buy the wedges and magnetic shuts from
> > Wells-Gardner. Have you found any documented procedure for the placement
> > of the shunts?
> >
>
>I believe one of the raster repair manuals for the WG4600/4900 or G07
>discusses this procedure. It should be the same for vector monitors. I
>believe you use the white crosshatch pattern (all colors) and allign the
>lines in each corner of the screen by installing/adjusting the shunts.
>I talked to a TV repair man and he suggested using little button magnets
>available from radio shack as they provide a more powerful magnet and
>can be stacked in multiples for greater effect. Silicon sealer and tape
>should hold them in place.
>
>Noel
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Mon Aug 21 08:32:32 2000
This archive was generated by hypermail 2.1.8 : Thu Jul 31 2003 - 23:01:02 EDT