Re: Tech: Electrohome G05

i have tried a working monitor and the
game board is working 100%, no problems
there either.

>From: Jon Raiford <raiford@mindspring.com>
>Reply-To: vectorlist@synthcom.com
>To: vectorlist@synthcom.com
>Subject: Re: VECTOR: Tech: Electrohome G05
>Date: Mon, 23 Oct 2000 11:42:57 -0400
>
>Try swapping the x and y pins on the monitor connector (or try another
>known good monitor) to verify that this is a monitor problem. It sounds
>like it could be a problem with the game board.
>
>Jon
>
>At 03:18 PM 10/23/2000 +0000, you wrote:
> >have a later model GO5 that i would like
> >some help on, the monitor plays in the center
> >of the screen approx. 1/4" wide, the full
> >height of the screen, but does not go out
> >towards the left or right any further than
> >the 1/4" path, i have already installed a cap
> >kit with transistors and resoldered all the
> >head pins, with NO results, the HV unit is
> >working, and the spot killer DOES NOT come
> >on, and NO FUSES have been blown. Dont notice
> >anything out of the ordinary, was wondering if
> >someone on the list could help.
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.

_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.

Share information about yourself, create your own public profile at
http://profiles.msn.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Mon Oct 23 13:01:08 2000