Re: Tech: Electrohome G05

Check R620 and R720. They should measure the same (2 ohms). If one is open it
would cause a collapse in that axis. If you have to replace one it MUST be
non-inductive.

Lunar Lander wrote:

> have a later model GO5 that i would like
> some help on, the monitor plays in the center
> of the screen approx. 1/4" wide, the full
> height of the screen, but does not go out
> towards the left or right any further than
> the 1/4" path, i have already installed a cap
> kit with transistors and resoldered all the
> head pins, with NO results, the HV unit is
> working, and the spot killer DOES NOT come
> on, and NO FUSES have been blown. Dont notice
> anything out of the ordinary, was wondering if
> someone on the list could help.
>
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
> Share information about yourself, create your own public profile at
> http://profiles.msn.com.
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.

--
Windows:
32 bit graphical interface for a
16 bit patch for an
8 bit operating system written for a
4 bit processor by a
2 bit company that can't stand
1 bit of competition.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.