RE: Tech: Electrohome G05

What would happen if they weren't non-inductive?

> -----Original Message-----
> From: owner-vectorlist@synthcom.com
> [mailto:owner-vectorlist@synthcom.com]On Behalf Of Rodger Boots
> Sent: Monday, October 23, 2000 2:22 PM
> To: vectorlist@synthcom.com
> Subject: Re: VECTOR: Tech: Electrohome G05
>
>
> Check R620 and R720. They should measure the same (2 ohms). If
> one is open it
> would cause a collapse in that axis. If you have to replace one
> it MUST be
> non-inductive.
>
>
> Lunar Lander wrote:
>
> > have a later model GO5 that i would like
> > some help on, the monitor plays in the center
> > of the screen approx. 1/4" wide, the full
> > height of the screen, but does not go out
> > towards the left or right any further than
> > the 1/4" path, i have already installed a cap
> > kit with transistors and resoldered all the
> > head pins, with NO results, the HV unit is
> > working, and the spot killer DOES NOT come
> > on, and NO FUSES have been blown. Dont notice
> > anything out of the ordinary, was wondering if
> > someone on the list could help.
> >
> >
> _________________________________________________________________________
> > Get Your Private, Free E-mail from MSN Hotmail at
> http://www.hotmail.com.
> >
> > Share information about yourself, create your own public profile at
> > http://profiles.msn.com.
> >
> >
> ------------------------------------------------------------------
> ---------
> > ** To UNSUBSCRIBE from vectorlist, send a message with
> "UNSUBSCRIBE" in the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to neil@synthcom.com.
>
> --
> Windows:
>
> 32 bit graphical interface for a
> 16 bit patch for an
> 8 bit operating system written for a
> 4 bit processor by a
> 2 bit company that can't stand
> 1 bit of competition.
>
>
> ------------------------------------------------------------------
> ---------
> ** To UNSUBSCRIBE from vectorlist, send a message with
> "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.
>
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Mon Oct 23 17:26:12 2000