Re: Tech: Electrohome G05

From: Rodger Boots <rlboots_at_cedar-rapids.net>
Date: Tue Oct 24 2000 - 05:29:35 EDT

Ever see a Tempest with little sawtooths running through all the line
segments? One way to get it to do that is to use regular (slightly inductive)
resistors. Makes the output stage oscillate slightly.

Bret Pehrson wrote:

> What would happen if they weren't non-inductive?
>
> > -----Original Message-----
> > From: owner-vectorlist@synthcom.com
> > [mailto:owner-vectorlist@synthcom.com]On Behalf Of Rodger Boots
> > Sent: Monday, October 23, 2000 2:22 PM
> > To: vectorlist@synthcom.com
> > Subject: Re: VECTOR: Tech: Electrohome G05
> >
> >
> > Check R620 and R720. They should measure the same (2 ohms). If
> > one is open it
> > would cause a collapse in that axis. If you have to replace one
> > it MUST be
> > non-inductive.
> >
> >
> > Lunar Lander wrote:
> >
> > > have a later model GO5 that i would like
> > > some help on, the monitor plays in the center
> > > of the screen approx. 1/4" wide, the full
> > > height of the screen, but does not go out
> > > towards the left or right any further than
> > > the 1/4" path, i have already installed a cap
> > > kit with transistors and resoldered all the
> > > head pins, with NO results, the HV unit is
> > > working, and the spot killer DOES NOT come
> > > on, and NO FUSES have been blown. Dont notice
> > > anything out of the ordinary, was wondering if
> > > someone on the list could help.
> > >
> > >
> > _________________________________________________________________________
> > > Get Your Private, Free E-mail from MSN Hotmail at
> > http://www.hotmail.com.
> > >
> > > Share information about yourself, create your own public profile at
> > > http://profiles.msn.com.
> > >
> > >
> > ------------------------------------------------------------------
> > ---------
> > > ** To UNSUBSCRIBE from vectorlist, send a message with
> > "UNSUBSCRIBE" in the
> > > ** message body to vectorlist-request@synthcom.com. Please direct other
> > > ** questions, comments, or problems to neil@synthcom.com.
> >
> > --
> > Windows:
> >
> > 32 bit graphical interface for a
> > 16 bit patch for an
> > 8 bit operating system written for a
> > 4 bit processor by a
> > 2 bit company that can't stand
> > 1 bit of competition.
> >
> >
> > ------------------------------------------------------------------
> > ---------
> > ** To UNSUBSCRIBE from vectorlist, send a message with
> > "UNSUBSCRIBE" in the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to neil@synthcom.com.
> >
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.

--
Windows:
32 bit graphical interface for a
16 bit patch for an
8 bit operating system written for a
4 bit processor by a
2 bit company that can't stand
1 bit of competition.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Tue Oct 24 05:46:08 2000

This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:32:54 EDT