The +/-22 gets cut down to +/-15 on the main board to power some amps after
the DACs in the display section. You can see this on:
http://www.spies.com/arcade/schematics/atari/RedBaron2B.tiff
On the aux board, the +22 is used for sound. The +/-22 also gets cut down
to +/-15 and is then turned into -30 for (what I assume is) the EAROM. You
can see this on:
http://www.spies.com/arcade/schematics/atari/RedBaron3B.tiff
Paul Sommers
<rgvac_aust@dingobl To: vectorlist@synthcom.com
ue.net.au> cc:
Sent by: Subject: Re: VECTOR: Red Barron Board?
owner-vectorlist@sy
nthcom.com
12/15/2000 07:36 PM
Please respond to
vectorlist
BTW - I checked the pinouts to see if I could test it in my Asteroids, but
it
requires 22 volts. I'm hoping this is only used for the sound section and I
can make a harness supplying the +5, -5 and +12 from the AR board.
Otherwise I can't test it. Still wouldn't be able to test the sound section
but it would be a start.
Cheers
Paul
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Sat Dec 16 09:10:35 2000
This archive was generated by hypermail 2.1.8 : Thu Jul 31 2003 - 23:30:30 EDT