RE: MH Repro roller project

I've been using mine with the cast nylon roller for almost a year and it's
held up great. No measurable wear at the contact points and it rolls as
smooth as it did the day it was assembled. Also no apparent shavings or
anything in the base. Still waiting to see the final version...

                        James

-----Original Message-----
From: owner-vectorlist@synthcom.com
[mailto:owner-vectorlist@synthcom.com]On Behalf Of tom mcclintock
Sent: Thursday, December 21, 2000 1:08 PM
To: vectorlist@synthcom.com
Subject: Re: VECTOR: MH Repro roller project

They are still "in production". I think Mark's been pre-occupied with
old and new projects.

The original roller stock was green translucent, and could therefore be
backlit. The only comparable roller stock found to date is green
oil-impregnated cast nylon which is opaque. It is rather nice though...
:)

tom

Bret Pehrson wrote:
>
> Does anyone know what happened to this project? I tried contacting Mark
via
> e-mail a while back and got no response.
>
> I'm basically after a spare roller, not the entire assembly.
>
> Thanks
>
> > -----Original Message-----
> > From: owner-vectorlist@synthcom.com
> > [mailto:owner-vectorlist@synthcom.com]On Behalf Of Mark E Davidson
> > Sent: Friday, September 1, 2000 3:59 PM
> > To: vectorlist@synthcom.com
> > Subject: VECTOR: MH Repro roller project
> >
> >
> > Here is a quick update on the Major Havoc repro roller project. Right
> > before my sons surgery, I found enough time to finish the machining work
> > on all the repro rollers, Whets left is to install the encoder PC boards
> > and encoder wheels and test them all (where did I put those boards?). At
> > that point Ill come up with a clever way to distribute them to the
> > masses. Figure mid September to wrap this up as Im in the middle of a
> > big automation side job that will be done this week. after that Ill be
> > in San Jose doing the installation. After its all said and done im free
> > to play on these side projects and can get this whole first run behind
> > me.
> >
> > -=Mark=-
> >
> >
> > ------------------------------------------------------------------
> > ---------
> > ** To UNSUBSCRIBE from vectorlist, send a message with
> > "UNSUBSCRIBE" in the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to neil@synthcom.com.
> >
>
> --------------------------------------------------------------------------
-
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Thu Dec 21 17:33:34 2000