Re: 6100 LV issues

No offense intended, as I respect the opinions of several of the people who
have replied...

but what in the world did all of you do before the LV2000 existed? I think
Brian's desire to not go that route is a legitimate and valid one. LV2000's
certainly are not a necessity for a reliable WG 6100. Surely there are some
folks who are willing to offer their experiences with repairing the original
LV section. Fortunately, all of mine (so far) have been fairly easy fixes,
so I'm not of much help on it.

Here's hoping some people will step forward with the kind of info we used to
see here in regards to keeping these monitors going.

Richard

----- Original Message -----
From: "Kev" <mowerman@erols.com>
To: <vectorlist@synthcom.com>
Sent: Thursday, February 07, 2002 4:50 PM
Subject: Re: VECTOR: 6100 LV issues

> I drop the LV-2000 in & forget it. Very important to the places I do
> support for & worth the extra cost/effort. (also an additional selling
> point, updated electronic design).
>
> I only put them in my machines when I have a failure, but then they aren't
> my machines unless they've had a failure.....
>
> Kev
>
>
> > So everyone's final solution is to give up and replace the LV circuit
with
> > an LV-2000? I'd like to hear what the others have to say about this. I
> > would like to keep my monitor original. The 6100 in my Space Duel has
> been
> > very reliable. That monitor is all original.. in fact, it still has the
> > matching Atari S/N sticker on it for the game. That machine has been to
a
> > couple of conventions (running all day for the weekend).
> >
> > I'd like to bring my Tempest monitor to that level. I feel I am close,
> > having rebuilt the HV and Deflection boards.. When it works, it looks
> > great. Solid, sharp, no wiggles.
> >
> > Again, I'm interested to see what everyone has to say about the
recurring
> > Q100/101 faulure in a 6100.
> >
> > Thanks
> > -Brian
> >
>
> --------------------------------------------------------------------------
> -
> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
> the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to neil@synthcom.com.
>
> --------------------------------------------------------------------------
-
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.
>

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Thu Feb 7 15:52:20 2002