Re: WG 6100 GRY wire

Now I need to ask this: Is the wire marked GRY next to the large caps on the
deflection board also a ground?

I have found on all thw WG 6100 parts I have that these wires have been chopped
(probably by ops.)

Thanks much,
Joe

Chris Starr wrote:

> I can confirm, definitely a grounding wire. Bolts on to the aluminum chassis
> on one of the holes between the HV chassis box and the deflection board on
> the right. Probably will help reduce the jitters you mentioned.
>
> c-starr
>
> ----- Original Message -----
> From: "Michael Thomas" <thomin@bellsouth.net>
> To: <vectorlist@synthcom.com>
> Sent: Tuesday, April 09, 2002 9:51 PM
> Subject: Re: VECTOR: WG 6100 GRY wire
>
> > The gray (grey?) wire attaches to the bottom aluminum plate of the
> chassis,
> > under
> > the same screw as the wire coming from the spring that stretches along the
> > bottom
> > of the tube. I would DEFINITELY re-connect it. As stated so many times
> > before
> > on Vectorlist, grounds are very important.
> >
> > Michael
> >
> > ----- Original Message -----
> > From: "LOUIS SRIANOMAI" <louisurfer@yahoo.com>
> > To: <vectorlist@synthcom.com>
> > Sent: Tuesday, April 09, 2002 4:31 PM
> > Subject: Re: VECTOR: WG 6100 GRY wire
> >
> >
> > > I just wired one of these, but I think it ties down to the chassis, I
> can
> > take
> > > a look tonight.
> > >
> > > L.
> > >
> > >
> > > --- "Bachmann, Joe C" <joe.c.bachmann@xo.com> wrote:
> > > >
> > > > Where does the wire marked GRY next to the tube socket on neck board
> of
> > a
> > > > WG 6100 go to?
> > > >
> > > > Both mine have this broke off. Does this even make a difference?
> > > >
> > > > Thanks,
> > > > Joe
> > > >
> > > >
> > >
> >
> > --------------------------------------------------------------------------
> > -
> > > > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE"
> in
> > the
> > > > ** message body to vectorlist-request@synthcom.com. Please direct
> other
> > > > ** questions, comments, or problems to neil@synthcom.com.
> > >
> >
> > --------------------------------------------------------------------------
> > -
> > > > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE"
> in
> > the
> > > > ** message body to vectorlist-request@synthcom.com. Please direct
> other
> > > > ** questions, comments, or problems to neil@synthcom.com.
> > >
> > >
> > > __________________________________________________
> > > Do You Yahoo!?
> > > Yahoo! Tax Center - online filing with TurboTax
> > > http://taxes.yahoo.com/
> >
> > --------------------------------------------------------------------------
> > -
> > > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
> > the
> > > ** message body to vectorlist-request@synthcom.com. Please direct other
> > > ** questions, comments, or problems to neil@synthcom.com.
> >
> > --------------------------------------------------------------------------
> -
> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
> the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to neil@synthcom.com.
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Tue Apr 9 21:33:04 2002