Re: Re: Bulk buy on Wintron flybacks

Count me for 1, possibly 2 depending on what kind of price can be
negotiated.... if really good, possibly 3...

-- Curt

>Date: Thu, 11 Apr 2002 15:23:13 -0400
>From: big dog <catfishh@bellsouth.net>
>X-Accept-Language: en
>MIME-Version: 1.0
>To: vectorlist@synthcom.com
>Subject: VECTOR: Re: Bulk buy on Wintron flybacks
>Content-Transfer-Encoding: 7bit
>
>Hi,
>
>I have heard folks in here talk about doing a bulk buy on these so many times
>but I have never seen anything become of it. I think I read a post where John
>Robertson was willing to do it if he could get some folks to prepay. I can use
>4 -5 of these so Im very interested. Lets get this thing going .......who all
>would be willing to do it?
>
>Mark Capps
>
>Michael Thomas wrote:
>
>> Yes Joe, it is a ground. As a matter of fact it is the center tap to the
>> 3-wire monitor power connection! I'm amazed anyone would cut this wire.
>> That gray wire goes to pin 14 on the monitor's 15-pin main input connector
>> (J100). It's the pin between the two violet wires on one end of the
>> connector. After passing through the connector, it veers off with the two
>> 25 volt power wires. It is also the center pin on this 3-pin connector.
>> Once again, you would absolutely want to rework this one.
>>
>> Michael
>>
>> ----- Original Message -----
>> From: "Joe Bachmann" <joe.bachmann@newmail.net>
>> To: <vectorlist@synthcom.com>
>> Sent: Wednesday, April 10, 2002 12:30 AM
>> Subject: Re: VECTOR: WG 6100 GRY wire
>>
>> > Now I need to ask this: Is the wire marked GRY next to the large caps on
>> the
>> > deflection board also a ground?
>> >
>> > I have found on all thw WG 6100 parts I have that these wires have been
>> chopped
>> > (probably by ops.)
>> >
>> > Thanks much,
>> > Joe
>> >
>> > Chris Starr wrote:
>> >
>> > > I can confirm, definitely a grounding wire. Bolts on to the aluminum
>> chassis
>> > > on one of the holes between the HV chassis box and the deflection board
>> on
>> > > the right. Probably will help reduce the jitters you mentioned.
>> > >
>> > > c-starr
>> > >
>> > > ----- Original Message -----
>> > > From: "Michael Thomas" <thomin@bellsouth.net>
>> > > To: <vectorlist@synthcom.com>
>> > > Sent: Tuesday, April 09, 2002 9:51 PM
>> > > Subject: Re: VECTOR: WG 6100 GRY wire
>> > >
>> > > > The gray (grey?) wire attaches to the bottom aluminum plate of the
>> > > chassis,
>> > > > under
>> > > > the same screw as the wire coming from the spring that stretches along
>> the
>> > > > bottom
>> > > > of the tube. I would DEFINITELY re-connect it. As stated so many
>> times
>> > > > before
>> > > > on Vectorlist, grounds are very important.
>> > > >
>> > > > Michael
>> > > >
>> > > > ----- Original Message -----
>> > > > From: "LOUIS SRIANOMAI" <louisurfer@yahoo.com>
>> > > > To: <vectorlist@synthcom.com>
>> > > > Sent: Tuesday, April 09, 2002 4:31 PM
>> > > > Subject: Re: VECTOR: WG 6100 GRY wire
>> > > >
>> > > >
>> > > > > I just wired one of these, but I think it ties down to the chassis,
>> I
>> > > can
>> > > > take
>> > > > > a look tonight.
>> > > > >
>> > > > > L.
>> > > > >
>> > > > >
>> > > > > --- "Bachmann, Joe C" <joe.c.bachmann@xo.com> wrote:
>> > > > > >
>> > > > > > Where does the wire marked GRY next to the tube socket on neck
>> board
>> > > of
>> > > > a
>> > > > > > WG 6100 go to?
>> > > > > >
>> > > > > > Both mine have this broke off. Does this even make a difference?
>> > > > > >
>> > > > > > Thanks,
>> > > > > > Joe
>> > > > > >
>> > > > > >
>> > > > >
>> > > >
>> > >
>> > --------------------------------------------------------------------------
>> > > > -
>> > > > > > ** To UNSUBSCRIBE from vectorlist, send a message with
>> "UNSUBSCRIBE"
>> > > in
>> > > > the
>> > > > > > ** message body to vectorlist-request@synthcom.com. Please direct
>> > > other
>> > > > > > ** questions, comments, or problems to neil@synthcom.com.
>> > > > >
>> > > >
>> > >
>> > --------------------------------------------------------------------------
>> > > > -
>> > > > > > ** To UNSUBSCRIBE from vectorlist, send a message with
>> "UNSUBSCRIBE"
>> > > in
>> > > > the
>> > > > > > ** message body to vectorlist-request@synthcom.com. Please direct
>> > > other
>> > > > > > ** questions, comments, or problems to neil@synthcom.com.
>> > > > >
>> > > > >
>> > > > > __________________________________________________
>> > > > > Do You Yahoo!?
>> > > > > Yahoo! Tax Center - online filing with TurboTax
>> > > > > http://taxes.yahoo.com/
>> > > >
>> > >
>> > --------------------------------------------------------------------------
>> > > > -
>> > > > > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE"
>> in
>> > > > the
>> > > > > ** message body to vectorlist-request@synthcom.com. Please direct
>> other
>> > > > > ** questions, comments, or problems to neil@synthcom.com.
>> > > >
>> > >
>> > --------------------------------------------------------------------------
>> > > -
>> > > > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE"
>> in
>> > > the
>> > > > ** message body to vectorlist-request@synthcom.com. Please direct
>> other
>> > > > ** questions, comments, or problems to neil@synthcom.com.
>> > >
>> >
>> > --------------------------------------------------------------------------
>> -
>> > > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
>> the
>> > > ** message body to vectorlist-request@synthcom.com. Please direct other
>> > > ** questions, comments, or problems to neil@synthcom.com.
>> >
>> > --------------------------------------------------------------------------
>> -
>> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
>> the
>> > ** message body to vectorlist-request@synthcom.com. Please direct other
>> > ** questions, comments, or problems to neil@synthcom.com.
>>
>> ---------------------------------------------------------------------------
>> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>> ** message body to vectorlist-request@synthcom.com. Please direct other
>> ** questions, comments, or problems to neil@synthcom.com.
>
>---------------------------------------------------------------------------
>** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
>** message body to vectorlist-request@synthcom.com. Please direct other
>** questions, comments, or problems to neil@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Thu Apr 11 17:12:48 2002