There are some CRTs that carry the X-ray warning with as little as 12
KV. There are others that DON'T carry a warning and can be run at 30
KV.
The 19VARP4 is listed as having X-ray limiting glass. I don't know why
that is, I didn't write the book, I just quote it.
Mark Shostak wrote:
>
> IIRC, X-rays aren't produced until after you get (something around) 28KV in
> a vacuum.
> Would that be an issue on a mono display?
>
> ----- Original Message -----
> From: Rodger Boots <rlboots@cedar-rapids.net>
> To: <vectorlist@synthcom.com>
> Sent: Wednesday, April 24, 2002 2:30 PM
> Subject: Re: VECTOR: Re: Bulk buy on Wintron flybacks
>
> > Zonn wrote:
> > >
> > > The gold box supply from Keltron used in the Cine monitors is rated at
> 16kv, so,
> > > do B&W monitors have leaded glass?
> > >
> > > -Zonn
> >
> >
> > Back when you asked this I didn't have an answer. Now, with a Sylvania
> > tube manual in hand, I can quote you this:
> >
> > "Tube type made with X-radiation limiting glass for viewer protection.
> > For continued X-radiation protection, such tubes must be replaced ONLY
> > with tube types made with an equivalent X-radiation limiting glass."
> >
> > Sylvania claims a 19VARP4 can be operated up to 18 KV.
> >
> > --------------------------------------------------------------------------
> -
> > ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in
> the
> > ** message body to vectorlist-request@synthcom.com. Please direct other
> > ** questions, comments, or problems to neil@synthcom.com.
> >
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to neil@synthcom.com.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to neil@synthcom.com.
Received on Wed Apr 24 23:24:59 2002
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:34:00 EDT