RE: A bad day in My arcade (V2000 help)

Mark,
I'm not sure what monitor Lunar Lander uses, so I'm assuming it's a 19". If
the HV is only 12kv, I'd look there. I'm pretty sure the G05-802 and the
19V2000 are supposed to have 19.5kv. Unless LL uses an early G05 and it
takes that much less HV....
Lewis

> -----Original Message-----
> From: owner-vectorlist@synthcom.com
> [mailto:owner-vectorlist@synthcom.com]On Behalf Of Christopher X.
> Candreva
> Sent: Monday, July 15, 2002 11:15 AM
> To: vectorlist@synthcom.com
> Subject: Re: VECTOR: A bad day in My arcade (V2000 help)
>
>
> On Mon, 15 Jul 2002, Mark E Davidson wrote:
>
> > If I turn up the brightness, I do have a picture.. In fact, to looks
> > just like my scope... Retrace lines and all. But there is
> no way to to
> > get a picture with out driving the brightness too high.
> (and getting the
> > center spot on the tube and all the lines.
>
> I'ld start with the Z circuit.
>
> Does your scope have a Z-input, so you could check that
> comming from the
> board too ? Otherwise I suppose you could just look at it as
> a trace, just
> to see if something is there.
>
> ==========================================================
> Chris Candreva -- chris@westnet.com -- (914) 967-7816
> WestNet Internet Services of Westchester
> http://www.westnet.com/
>
> --------------------------------------------------------------
> -------------
> ** To UNSUBSCRIBE from vectorlist, send a message with
> "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please
> direct other
> ** questions, comments, or problems to vectorlist-owner@synthcom.com.
>
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Mon Jul 15 10:45:48 2002