They go like this:
3==========E
3==========E
3==========E
Purple, blue, green yellow, n/c, red, brown
or if you like you can go to:
http://64.192.41.141/swaudio.jpg
-Douglas
on 9/3/02 7:42 PM, Stempak Arcadius-ASTEMPA1 at ASTEMPA1@motorola.com wrote:
>
> All,
> ****
>
> Have a rather Simple Question, but since I have not been
> able to get an answer I thought I would ask all you Star Wars
> Experts, out there.
>
> O.K. I have the Typical 3 Boardset ATARI StarWars (Vector)
> Sandwich. However I am missing the Large Red Connector
> on the end Cable, which Resides between the SOUND/SPEECH BOARD
> and the MAIN BOARD if I recall correctly. Anyhow the Question is,
> do the Big Pins that this Cable connects, Connect Up on a One for
> One Basis,(Pin 1 to Pin 1, Pin 2 to Pin 2,,, etc...)??? Or
> is there some kind of Swapping going on when Connecting these Pins
> from Board to Board ???
>
> Also and just out of Curiousity what is this Cable actually used for
> Does it Carry any type of Data, or just Power Connections from Board
> to Board ???
>
>
>
> Arcadius.......... :-)
>
>
> ---------------------------------------------------------------------------
> ** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
> ** message body to vectorlist-request@synthcom.com. Please direct other
> ** questions, comments, or problems to vectorlist-owner@synthcom.com.
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Tue Sep 3 21:23:18 2002
This archive was generated by hypermail 2.1.8 : Fri Aug 01 2003 - 00:34:08 EDT
