RE: WG-6100 help PLEASE!

I had a similar problem. Check diode at D701 (1n4001).
Its kind of under the large cement resistor.

-----Original Message-----
From: owner-vectorlist@synthcom.com
[mailto:owner-vectorlist@synthcom.com]On Behalf Of dax@xmission.com
Sent: Friday, May 16, 2003 9:08 PM
To: vectorlist@synthcom.com
Subject: VECTOR: WG-6100 help PLEASE!

I'm working on a couple of color vector monitors and have two working
deflection
boards ( finally!). I also have one working hv cage but after testing a
deflection board
I swapped out the hv cages and R100 becomes a campfire instantly and Q100
naturally also goes - I assume it's Q100 followed by R100 but whatever.
Obviously there is a problem with the HV but I can't seem to find anything
yet.
I'm sure this is something many have dealt with. Any ideas or tips would be
appreciated.

Thanks,

-Dave
---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.

---------------------------------------------------------------------------
** To UNSUBSCRIBE from vectorlist, send a message with "UNSUBSCRIBE" in the
** message body to vectorlist-request@synthcom.com. Please direct other
** questions, comments, or problems to vectorlist-owner@synthcom.com.
Received on Mon May 19 06:00:27 2003