>If you use the dremmel, be sure to wear safety glasses and have a good
>touch. If you bear down too hard, you may cut the PCB under the legs when
>it cuts through.
I wouldn't advise using a Dremmel for chip removal due to the possibility
of metal filings creeping under chips, etc so causing shorts elsewhere on
the board and inevitably leading to more fault-finding.
Phil
---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Fri Sep 8 15:05:33 2006
This archive was generated by hypermail 2.1.8 : Fri Sep 08 2006 - 15:50:01 EDT