Re: Re: Star Wars Self-Test

Ive used it in the past before I was good at pulling chips, I never had any
problems that a quick blow of air couldn't sort out. Of course you need a
really slim disc
----- Original Message -----
From: "Phil Morris" <arcaderelics@irongiant.org.uk>
To: <vectorlist@vectorlist.org>
Sent: Friday, September 08, 2006 8:07 PM
Subject: Re: VECTOR: Re: VECTOR: Star Wars Self-Test

>
>>If you use the dremmel, be sure to wear safety glasses and have a good
>>touch. If you bear down too hard, you may cut the PCB under the legs when
>>it cuts through.
>
> I wouldn't advise using a Dremmel for chip removal due to the possibility
> of metal filings creeping under chips, etc so causing shorts elsewhere on
> the board and inevitably leading to more fault-finding.
>
>
> Phil
>
>
> ---------------------------------------------------------------------------
> ** Unsubscribe, subscribe, or view the archives at
> http://www.vectorlist.org
> ** Please direct other questions, comments, or problems to
> chris@westnet.com
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.405 / Virus Database: 268.11.7/438 - Release Date: 9/5/2006
>
>

---------------------------------------------------------------------------
** Unsubscribe, subscribe, or view the archives at http://www.vectorlist.org
** Please direct other questions, comments, or problems to chris@westnet.com
Received on Fri Sep 8 15:21:27 2006